Unable to change resource settings in Windows XP Device Manager

Article translations Article translations
Article ID: 315278 - View products that this article applies to.
This article was previously published under Q315278
For a Microsoft Windows 2000 version of this article, see 269491.
Expand all | Collapse all


On a computer that is running the Advanced Configuration and Power Interface (ACPI) Hardware Abstraction Layer (HAL), you are not able to change a resource setting for a device in Device Manager.

If you modify the resource settings in the BIOS, the changes do not register.


This behavior occurs because the ACPI HAL controls resource assignments in Windows XP and does not permit user intervention.


This behavior is by design.


Microsoft does not recommend that you change the HAL that is installed during the Windows XP Setup process. When you change from the ACPI HAL to the Standard PC HAL, you must reinstall the operating system, and ACPI functionality is lost.

In some rare instances, you may need to have control over a resource assignment. You can manually configure resources in Windows only if you are using Standard PC HAL, and even then you may not be able to configure some devices. The device must support manually setting of resources.

For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
237556 How to troubleshoot Windows 2000 Hardware Abstraction Layer issues
252420 General description of IRQ sharing in Windows 2000
216251 How to specify a specific or third-party HAL during Windows XP setup


Article ID: 315278 - Last Review: December 1, 2007 - Revision: 2.4
  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional
  • Microsoft Windows XP Professional x64 Edition
kbplugplay kbprb kbsetup KB315278

Give Feedback


Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com