Article ID: 158744 - View products that this article applies to.
This article was previously published under Q158744
This article has been archived. It is offered "as is" and will no longer be updated.
Network Monitor gives you the ability to automatically start capturing network information upon starting the program. This is completed by using command-line parameters that can be passed to the program.
You can use this feature, for example, in conjunction with the AT command to start Network Monitor when a backup operation begins. To do this, put the command to AUTOSTART Network Monitor in the batch file just before the backup operation starts, as in the following example batch file:
@echo offThe rest of this article describes the command line options for running Network Monitor. For more information, see the Network Monitor Help file in the Systems Management Server Administrator's Guide.
Start Netmon /AUTOSTART
NTBACKUP backup C:\<directory path> /B /L "C:\BACKUP.LOG"
/REMOTE <remote_name>Starts Network Monitor with a connection to the Network Monitor Agent specified.
/NET <number>Starts Network Monitor with a connection to the network number specified. Use the numbers 1 to N+1 where N is the number of Network cards present in the computer. The one additional interface is the RAS/VPN interface.
/CAPTUREFILTER: <path>Starts Network Monitor with a specific capture filter loaded.
/DISPLAYFILTER <path>Starts Network Monitor with a specific display filter loaded.
/BUFFERSIZE <number>Starts Network Monitor with the buffers size preset to the number of bytes specified.
/QUICKFILTER <type>, <address>Begins capturing as soon as Network Monitor is started, and filters on the address specified.
/AUTOSTARTBegins capturing immediately upon starting.
/AUTOSTOPStops the Network Monitor capture file when the buffer is full.
/BUFFERSIZE:NUMBERStarts Network Monitor with the buffer size preset to the number of megabytes specified (Network Monitor 2.0).
Article ID: 158744 - Last Review: February 28, 2014 - Revision: 2.1