Article ID: 944799 - View products that this article applies to.
This article has been archived. It is offered "as is" and will no longer be updated.
You set a high definition (HD) audio controller not to wake a Windows Vista-based computer by using the Allow this Device to wake the Computer option in Windows Vista. However, the "wake on ring" (WOR) feature still wakes the computer from sleep and from hibernation.
This problem occurs because the computer continues to trickle power to the HD audio chip if you disable the HD audio chip, and the WOR feature is enabled. You must disable the HD audio controller, and you must also disable the WOR feature. When you disable the HD audio controller and the WOR feature, a small trickle of power is conserved when transitioning into sleep mode or into hibernation.
To work around this problem, disable the WOR feature, and remove the AC power supply so that the computer runs on battery power. Then, the HD audio controller bus can no longer wake the computer.
You can selectively disable the WOR feature and the HD audio controller. To do this, follow these steps:
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
When the computer is plugged into AC power and enters sleep mode, the HD audio chip continues to use power. Then, if a computer is transitioned to battery power while Windows is in hibernation, the devices continue to draw current. This may not be desirable for extended sleep durations if no AC power is supplied.
Microsoft is researching this problem and will post more information in this article when the information becomes available.
Article ID: 944799 - Last Review: January 16, 2015 - Revision: 1.0