Article ID: 85636 - View products that this article applies to.
This article was previously published under Q85636
American Megatrends, Inc. (AMI) BIOS will produce audible beeps associated with beep codes during the power-on self test (POST). Depending upon the condition, a predefined number of beeps are sounded, which are associated with the error messages below.
NOTE: Some systems produce beeps as part of the normal boot sequence. This article refers to beeps produced by the AMI ROM BIOS before the operating system loads.
MS-DOS does not produce beep codes.
The error messages associated with the AMI BIOS beep codes are as follows:
These errors are codes reported by the system BIOS. Because the errors are hardware related, you should call your hardware manufacturer or reseller for help in correcting the problem.
Number of Beeps Error Message --------------- ------------- 1 DRAM refresh failure 2 Parity circuit failure 3 Base 64K RAM failure 4 System timer failure 5 Processor failure 6 Keyboard controller gate A20 error 7 Virtual mode exception error 8 Display memory R/W test failure 9 ROM-BIOS checksum failure
The product included here, AMI BIOS, is manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Article ID: 85636 - Last Review: November 16, 2006 - Revision: 2.1