Article ID: 259922 - View products that this article applies to.
This article was previously published under Q259922
During a Netmon trace (or possibly in event logs) you may see Domain Name Service (DNS) queries and errors messages relating to blackhole.isi.edu. For example, the following Warning event may be logged:
Event Type: Warning
This behavior can occur when Windows 2000 tries to register the DNS PTR (reverse-lookup) record for a private network address. For example, if your server has a 10.0.0.x Internet Protocol (IP) address, the primary DNS server for 10.in-addr.arpa (which is the reverse-lookup zone for the 10.x address range) currently is blackhole.isi.edu. You should receive similar results for the 192.168.x.x and the 172.16.0.0-172.31.255.255 address range as well.
To resolve this issue, use one of the following options.
Option 1Configure your local DNS server to have the reverse-lookup zone that the Windows 2000-based computers can use to register. For example, if your computers are using a 10.0.0.x IP address, create a reverse-lookup zone of 10.in-addr.arpa on the local DNS server on which the Windows 2000-based computers are attempting to register.
Option 2Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756Disable Windows 2000 from registering the PTR record, using the following steps:
(http://support.microsoft.com/kb/322756/ )How to back up and restore the registry in Windows
You can use the nslookup command from a command prompt to try and verify the information. The following example returns primary name server = prisoner.iana.org:
c:>nslookup <cr>For more information, click the following article number to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/142863/ )Valid IP addressing for a private network
Article ID: 259922 - Last Review: October 11, 2007 - Revision: 6.5