STOP 0x0000001E or System Hangs When Mirroring Seagate ST32550

Article translations Article translations
Article ID: 137148 - View products that this article applies to.
This article was previously published under Q137148
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all


When you perform mirroring on a FAT or NTFS system partition on a Seagate ST32550N (Firmware Revision 14) hard disk connected to a DPT 2022 or 2122 SCSI controller (Firmware Revision 06B0 BIOS 2.D7), the following STOP error message appears in Windows NT 3.5:
STOP: 0x0000001E

When you perform the same procedure above in Windows NT 3.51, the Windows NT stops responding (hangs).


This problem occurs when Revision 14 of the Seagate hard-disk firmware is used.


Upgrade the firmware of the Seagate 32550N hard disk to Revision ASA2 16.


Article ID: 137148 - Last Review: February 24, 2014 - Revision: 4.1
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
kbnosurvey kbarchive KB137148

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from